[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] propane tanks revisited

To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] propane tanks revisited
From: Fly Deep <flydeep4u@yahoo.com>
Date: Sat, 1 May 2004 09:46:08 -0700 (PDT)
In-reply-to: <000e01c42ee6$c06951e0$61d44940@pc>
Reply-to: personal_submersibles@psubs.org
Sender: owner-personal_submersibles@psubs.org

Put the rings out side...........dont cut the hull open.or slide the rings through the hatch opening ..the rings can be in sections,,,,they dont need to bee a solid ring,,,they can be in 2 or 3 parts.

Pierre, Yes I would have to cut the tank to put the reinforcement
rings in, but that is no big deal. Also I would not need it painted so
that might reduce the cost more. I checked today on the thickness, one
was .233" another was .255"

Brian

Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs

Follow-Ups:
- Re: [PSUBS-MAILIST] propane tanks revisited
  - From: MerlinSub@t-online.de (Carsten Standfuss)
- Re: [PSUBS-MAILIST] propane tanks revisited
  - From: "Brian Cox" <ojaibees@ojai.net>

Next by Date: Re: [PSUBS-MAILIST] propane tanks revisited
Next by thread: Re: [PSUBS-MAILIST] propane tanks revisited
Index(es):
- Date
- Thread