[Date Prev][Date Next] [Chronological] [Thread] [Top]

Re: [PSUBS-MAILIST] O rings and pressure

To: personal_submersibles@psubs.org, <Personal_Submersibles@psubs.org>
Subject: Re: [PSUBS-MAILIST] O rings and pressure
From: William Alford <walford@dbtech.net>
Date: Wed, 19 Nov 2003 21:21:10 -0600
In-Reply-To: <001101c3af13$6f4ca800$a8d44940@pc>

At 07:07 PM 11/19/2003 -0800, Brian Cox wrote: 
>
> are there  recomended specs for this "o" ring ? 

http://www.polymersealing.com/pdf/cat_oring_001.pdf -- the best
information I've seen on the net.

Also, a free downloadable program called "inphorm" for O-ring design is at-- 

http://www.parker.com/inphorminfo/

Select "Use It" and download the o-ring program which allows you to select
o-rings based on 
various design criteria.

and . . . 
http://www.creavey.com/html/design.html 

William Alford

References:
- [PSUBS-MAILIST] O rings and pressure
  - From: "Brian Cox" <ojaibees@ojai.net>

Prev by Date: [PSUBS-MAILIST] PSUBS Standards Committee now forming: contact Doug Farrow at SeaLordOne@aol.com
Next by Date: Re: [PSUBS-MAILIST] O rings and pressure
Index(es):
- Chronological
- Thread