RE: [PSUBS-MAILIST] Information Needed for HDPE

["Alex Varouxis" <alex@associateddesign.com>]

What I am trying to determine is the failure (Crush Depth)  of an HDPE
Pressure vessel that will measure 10.75 inches OD and an I.D. of 9.49
inches. Length is 8 inches.

Regards Alex

-----Original Message-----
From: owner-personal_submersibles@psubs.org
[mailto:owner-personal_submersibles@psubs.org]On Behalf Of Pierre Poulin
Sent: Friday, June 06, 2003 3:48 PM
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] Information Needed for HDPE

Hi Steve,

Yes I we do automated painting. But it's liquid sprayed.

I don't know powdered coating but I will ask the paint expert here and let
you know if you can home build it.

Can I ask why you want to powder coat?

Pierre Poulin




>From: "Steven Mills" <barycenter@earthlink.net>
>Reply-To: personal_submersibles@psubs.org
>To: <personal_submersibles@psubs.org>
>Subject: Re: [PSUBS-MAILIST] Information Needed for HDPE
>Date: Fri, 6 Jun 2003 12:42:34 -0700
>
> >From: Pierre Poulin <pipo305@hotmail.com>
> >
> > Hi Alex.
> >
> > I work with HDPE all day. But the only thing that I do with it, is peint
>it!
> >
> > So if that can help, let me know!
> >
> > Pierre poulin
> >
>
>Pierre,
>
>What process are you using? Is this  production / automated
>painting or are you painting [ spraying ] by hand?
>
>Are you familiar with electrostatic bonding and/or powdered coatings?
>Would you know how to set up a homemade electrostatic spraying rig?
>
>--Steve
>
>
>
>

_________________________________________________________________
MSN Messenger : discutez en direct avec vos amis !
http://messenger.fr.msn.ca/