[Date Prev][Date Next] [Chronological] [Thread] [Top]

Re: [PSUBS-MAILIST] Double endcaps sub

and simply one of the best places in europe (imnsho) to visit.  been there twice now (in the last 3 years). i recommend summer over winter :)

the ppl are great, the cafes rock and someone spent far too much time paving the roads of amsterdam by hand - amazing!!

cheers
peter

At 22:43 5/4/03 +0200, you wrote:
Hi Pierre,
 
NL stands for The Netherlands or Holland as it is also called. It's a small country between England, on the other side of the North Sea and Germany.
 
Greatings,
 
Thijs Struijs
----- Original Message -----
From: pierre&marie
To: personal_submersibles@psubs.org
Sent: Sunday, May 04, 2003 3:34 AM
Subject: Re: [PSUBS-MAILIST] Double endcaps sub

Hi Thijs!
 
Where do you live? What is NL?
 
I think it's fun to know where people come from!
 
Pierre Poulin
Canada
 
----- Original Message -----
From: Thijs Struijs
To: personal_submersibles@psubs.org
Sent: Saturday, May 03, 2003 11:42 AM
Subject: Re: [PSUBS-MAILIST] Double endcaps sub

Rob,
 
Thank you for your reaction. The pressure hull has a diameter of 1300 mm (520 inch) so you can not lay down in it. I am thinking of a low seat (200 mm) that can be folded. When you want to have a close look at the bottom you would have to sit on your knees, or take a Yoga-course. I hope that changing my position from time to time will help me to reduce the pain. Because i live in a country with poor underwater visibility i need a viewport close to the bottom.
 
Greatings,
 
Thijs Struijs
NL     
----- Original Message -----
From: Rob Bell
To: personal_submersibles@psubs.org
Sent: Wednesday, April 30, 2003 8:14 PM
Subject: RE: [PSUBS-MAILIST] Double endcaps sub

That is a very nice design.  What is the seating position?  Would I be on my hands and knees if I were using the viewport facing forward and down?  Could you lie down in it?
 
Thanks!
-----Original Message-----
From: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org]On Behalf Of Thijs Struijs
Sent: Wednesday, April 30, 2003 1:11 PM
To: PSUBS
Subject: [PSUBS-MAILIST] Double endcaps sub
I have posted some drawings to:
 http://www.prismnet.com/~moki/subfiles.html
 
I have tried to streamline the double endcaps sub. I have added a GRP hull around the pressure hull.  Maybe it looks a little complicated but i think one has to make a mold for only a quater of the GRP hull and use it 3 times. With a little cutting and laminating one could make a hull like that if your are a little inventive (and we all are, are we not?). The keel looks like a box because i don't know yet what it will contain (batteries, VBT, ballast). What i do know is that i want to have a fairing around it. There is a lot of mud in The Netherlands and i don't want to stick in it. The idea is to bolt the fairing to the drop-ballast. So if you get stuck you can drop the ballast together with the fairing and you are free again.
 
The next thing i will do is to try to make some calculations on the stability.
 
I would like to hear what you think about it.
 
Greatings
 
Thijs Struijs       
   

Deze e-mail is door E-mail VirusScanner van Planet Internet gecontroleerd op virussen. Op http://www.planet.nl/evs staat een verwijzing naar de actuele lijst waar op wordt gecontroleerd.

Deze e-mail is door E-mail VirusScanner van Planet Internet gecontroleerd op virussen. Op http://www.planet.nl/evs staat een verwijzing naar de actuele lijst waar op wordt gecontroleerd.