Re: [PSUBS-MAILIST] Gyro-Compass, want to purchase

["Steven Mills" <barycenter@earthlink.net>]

>From: Warrend Greenway <dub@linuxmail.org>
>
> I wish you hadn't chosen the 8085, or any part from that family...Junk
compared to............

I agree, but it was "just an example" that had a valid commercial
applications and could be purchased economically.

--Steve


> > >From: <jbarlow@bjservices.ca>
> > >
> > > ...................snip...............
> > > I also doubt anything thats low cost is that good.
> > >
> >
> > Don't let low cost fool you into thinking poor quality.
> > Some of the best technologies out there are low cost.
> > I worked on IBM-ROLM CBXs ( now Siemens-ROLM )
> > and they ran on a legacy CPU, the Intel 8085. These CPUs
> > can be bought for a pittance...$2 or $3 each. There are
> > Intel SDKs and Motorola SDKs that can be purchased for
> > $300-$600 that can run small plants and factories.
> > Voyager has a Intel 4004CPU is programmed in COBOL
> > and assembler and I believe still sending signals.
> > Inexpensive CPUs, ICs...etc., are used in all manner of
> > modern equipment.
> > Well, that's my 2cents worth.
> >
> > --Steve
> >
> >
> >
> >
> >
> >
> >
> > >                       MerlinSub@t-online.de
> > >                       (Carsten Standfuss)               To:
> > personal_submersibles@psubs.org
> > >                       Sent by:                          cc:
> > >                       owner-personal_submersible        Subject:  Re:
> > [PSUBS-MAILIST] Gyro-Compass, want to purchase
> > >                       s@psubs.org
> > >
> > >
> > >                       10/01/2003 03:30 PM
> > >                       Please respond to
> >
> > >                       personal_submersibles
> > >
> > >
> > >
> > >
> > >
> > >
> > > Hi Steven - I can not belive that a 100 dollar gyro can give
> > > me an excat course over days..
> > > Is that real a gyro ?
> > > But please send me the zip file to
> > > Carsten@euronaut.org and I will check it out.
> > >
> > > thank you Carsten    WWW.euronaut.org
> > >
> > > Steven Mills schrieb:
> > > >
> > > > >From: Carsten Standfuss <MerlinSub@t-online.de>
> > > > >
> > > >
> > > > > Hi Submadmans, I looking for a
> > > > > second hand but good working :
> > > > > - Gyro Compass -
> > > > >
> > > > > (maybe from an aircraft) and
> > > > > electric driven (not air driven).
> > > > >
> > > >
> > > > Are you familiar with "silicon sensing systems" or "MEMS-based gyros
"?
> > > >
> > > > They are used in things like model rockets, ROVs and AUVs, auto
vehicle
> > > > stability control, marine autopilots....etc.
> > > >
> > > > "CRS03"
> > > > "ICG180 Gyro"
> > > > "ICG400"
> > > >
> > > > are a few examples and the costs start around $100US.
> > > >
> > > > I'm sure you can find a source in Germany ( Siemens might
> > > > have their own design perhaps? ).
> > > >
> > > > I have a data sheet for the CRS03. I could zip it to you?
> > > >
> > > > --Steve
> > >
> > >
> > >
> > >
> > >
> > >
> >
>
> --
> ______________________________________________
> http://www.linuxmail.org/
> Now with POP3/IMAP access for only US$19.95/yr
>
> Powered by Outblaze