[Date Prev][Date Next]
[Chronological]
[Thread]
[Top]
Re: [PSUBS-MAILIST] Homemade batteries (was: nuclear psub? (fruity goodness))
Have you tried using a carbon sheet as the cath/anode? WOULD
this work?
EM.
---- Original message ----
>Date: Tue, 07 Jan 2003 10:28:15 +0800
>From: "Warrend Greenway" <dub@linuxmail.org>
>Subject: Re: [PSUBS-MAILIST] Homemade batteries
(was: nuclear psub? (fruity goodness))
>To: personal_submersibles@psubs.org
>
>Good question. I tried them all. I do remember that all of
my most succesful combinations
>included aluminum as one of the plates. I used brass, iron,
and copper with the aluminum.
>I think the copper and aluminum produced the most current in
brine. You have to have a series
>of plates if you want more than a volt and a half.
>
>Warren.
>
>On Tue, 07 Jan 2003 03:59:25 +0800 "Warrend Greenway" writes:
>>Were the probes dissimilar metals? I made a sea-water
battery before,
>>using plates that were arranged like gills that the brine
flowed
>>through. Worked great. Only problem is that the elecrton
migration
>>consumes the plates and in the end it is more expensive
then standard
>>batteries!
>
>What metals did you use for plates?
>
>
>
>Mike H.
>
>
>
>_____________________________________________________________
___
>Sign Up for Juno Platinum Internet Access Today
>Only $9.95 per month!
>Visit www.juno.com
>
>--
>______________________________________________
>http://www.linuxmail.org/
>Now with POP3/IMAP access for only US$19.95/yr
>
>Powered by Outblaze
>