[Date Prev][Date Next]
[Chronological]
[Thread]
[Top]
Re: [PSUBS-MAILIST] Hydrogen Fuel Cells coming closer for Psubs?
I was wondering the same thing. Perhaps some sort of 'scrubber' could
chemically afix or absorb any stray hydrogen gas in the separate fuel cell
pod. I reckon the feasability of such a 'hydrogen scrubber' would be
dependant upon how much gas the fuel cell leaks.
One might even flood the separate pod holding the fuel cell with an inert
gas, floating the hydrogen to the roof, while designing your electrical
cables and equipment into the lower half of the pod.
On a larger submersible, the large output and small space of the fuel cell
easily offsets it's cost and 'newness,' but most people using their PSubs
for recreational use probably won't want to spend more than five hours at a
time crammed into their PSubs. A small PSub needing only five hours of
power can probably get more power-per-volume-of-equipment from standard
batteries than from a commercial fuel cell. Of course the power and
duration needed for your particular submersible defines how much more
compact a fuel cell is in comparison to batteries. But at first glance it
would seem that a fuel cell system is larger than a battery system until you
get into the live-a-board or working size submersibles.
I would love to hear the average time spent underwater per dive and how
long it takes to deplete the batteries. Those with with their own PSubs
please relate yer experiences.
Regards,
Shin
"And further more, be advised that although this is actually a live
broadcast and is being sent out at this very moment, it is quite possible
that it may arrive tomorrow, right now, or perhaps even yesterday." -Serial
Experiments Lain ep#8
From: Ian Roxborough <irox@ix.netcom.com>
Date: Fri, 6 Dec 2002 10:05:49 -0800
On Thu, 05 Dec 2002 22:53:05 +0100
MerlinSub@t-online.de (Carsten Standfuss) wrote:
> - Hydrogen leakage.. most available system are not 100 %
> hydrogen tight.. no problem in a car.. but in a sub..
> .. maybe a candle can fix that..
I wonder if putting the fuel cell in some sort of container
and placing hydrocap on the container and also a pressure gauge
would be a feasible way of monitoring and preventing hydrogen
leaks.
Ian.
_________________________________________________________________
Add photos to your messages with MSN 8. Get 2 months FREE*.
http://join.msn.com/?page=features/featuredemail