Re: [PSUBS-MAILIST] Ballast ratio to subs weight?

["Jeff Post" <jeffpost@rawbw.com>]

Sounds like you need a Busby bad!!

How is it you would be ordering steel if you have no idea what it takes to
float or sink a sub? This is serious! It is one thing to scratch out a sub
on paper and not have a clue about the principles of submarines, but it is
entirely another to construct a sub when you have no idea what you are
doing. You could very successfully kill yourself!

I'm sorry to be so harsh. I hope you are fibbing about ordering the steel.
You need to go to the library, or surf the web. Seriously, look in the
archives about all the discussions about "Busby's", I hear there are plenty
for all.

JP


----- Original Message -----
From: Graham K <cryogenicz@dsl-only.net>
To: <personal_submersibles@psubs.org>
Sent: Tuesday, June 04, 2002 10:27 AM
Subject: [PSUBS-MAILIST] Ballast ratio to subs weight?


> how do you know your subs going to float? how do you know you have enough
> ballast buoyancy?
>
> Regards,
>
> Graham
>
> -----Original Message-----
> From: owner-personal_submersibles@psubs.org
> [mailto:owner-personal_submersibles@psubs.org]On Behalf Of Alec Smyth
> Sent: Tuesday, June 04, 2002 7:45 AM
> To: 'personal_submersibles@psubs.org'
> Subject: RE: [PSUBS-MAILIST] Thru hull Seals
>
>
> Graham, that's a heck of a depth. Please do tell us what you're up to! I
> apologize if I've missed out on some earlier posting.
>
> cheers,
>
> Alec
>
> -----Original Message-----
> From: Graham K [mailto:cryogenicz@dsl-only.net]
> Sent: Tuesday, June 04, 2002 1:22 AM
> To: personal_submersibles@psubs.org
> Subject: [PSUBS-MAILIST] Thru hull Seals
>
>
> I have been looking for a hull Seal supplier for my sub, I would the
bearing
> seal to be able to have its crush depth around 2852 PSI, 6404 Feet. Anyone
> know of a online supplier, or someone with a telephone number or website?
>
> Regards
>
> Graham
>