[Date Prev][Date Next] [Chronological] [Thread] [Top]

Re: [PSUBS-MAILIST] pressure hull sizing

why dont you use a pressure valve?
----- Original Message -----
From: DBACKIDS@aol.com
To: personal_submersibles@psubs.org
Sent: Saturday, May 04, 2002 3:14 PM
Subject: Re: [PSUBS-MAILIST] pressure hull sizing

I don't know what to do with the excess pressure. Perhaps a pump to equalize the pressure by pumping some air into a different tank outside the hull? This could be set to the same rate as the o2 bleed, and therefore keep the pressure at 1 atm....Carl, about the co2, you could just simply add in a scrubbing system to get rid of that.

David