[Date Prev][Date Next] [Chronological] [Thread] [Top]

Re: [PSUBS-MAILIST] pressure hull sizing

To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] pressure hull sizing
From: DBACKIDS@aol.com
Date: Fri, 3 May 2002 23:48:46 EDT

Most likely the air support will be a recirculated air line w/ o2 being bled in and co2 scrubbers in the system. The o2 will be held in spherical tanks outside my main pressure hull, and the scrubber perhaps underneath the seat(s). The air would drawn out through a vent into the scrubbing system, then mixed with a line coming from the o2 tanks. The o2 bleed could maybe be set at a constant rate, or computer controlled to keep a fixed amount in the cabin.
That's about as much as I've thought out so far. Any suggestions?

David

Follow-Ups:
- Re: [PSUBS-MAILIST] pressure hull sizing
  - From: adam sweet <adam.sweet@sympatico.ca>

Prev by Date: [PSUBS-MAILIST] Fw: Naval History Magazine The Best in Historical Naval Literature and Art
Next by Date: Re: [PSUBS-MAILIST] newby from the UK
Index(es):
- Chronological
- Thread