[Date Prev][Date Next] [Chronological] [Thread] [Top]

Re: [PSUBS-MAILIST] pressure hull sizing

To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] pressure hull sizing
From: Michael Holt <mholt@richmond.edu>
Date: Mon, 29 Apr 2002 09:22:04 -0400
Organization: University of Richmond
References: <10d.1168da1f.29fe32c9@aol.com> <3CCD2D58.7C3D2CB3@onewest.net> <3CCD2F54.9BD1EA3@richmond.edu> <3CCD3D0D.BEBD0299@onewest.net>

Coalbunny wrote:
> 
> I have no idea.  Greg Carlson did the program.

If it's version 1.81 of Hulls, it should work with as little as 32M 
of RAM. 



Mike

Follow-Ups:
- Re: [PSUBS-MAILIST] pressure hull sizing
  - From: Coalbunny <coalbunny@onewest.net>

References:
- Re: [PSUBS-MAILIST] pressure hull sizing
  - From: DBACKIDS@aol.com
- Re: [PSUBS-MAILIST] pressure hull sizing
  - From: Coalbunny <coalbunny@onewest.net>
- Re: [PSUBS-MAILIST] pressure hull sizing
  - From: Michael Holt <mholt@richmond.edu>
- Re: [PSUBS-MAILIST] pressure hull sizing
  - From: Coalbunny <coalbunny@onewest.net>

Prev by Date: Re: [PSUBS-MAILIST] pressure hull sizing
Next by Date: Re: Re: [PSUBS-MAILIST] pressure hull sizing
Index(es):
- Chronological
- Thread