Re: [PSUBS-MAILIST] Hot-galvanize stainless steel ?

[MerlinSub@t-online.de (Carsten Standfuß)]

That is it - I put the last solution on 

http://www.prismnet.com/~moki/subfiles.html

shown as "X2". 

I will made the bottom cover plate from zinc.. 
We have a lot of used old zinc-anodes here on the
yard - I will heat one or two to liquid stage and 
make three custom zinc-anodes-cover plates..

They can be easy replace by a diver - just pressuzies
the diverchamber to 0,22 bar - open the bottom hatch
(see at "X13") jump out and replace the three plates 
with a screwdriver one times a year - maybe possible 
in summer times without a scuba gear.. 

thank you to everbody.. Carsten 

ronleonard schrieb:
> 
> What's wrong with just using a sacrificial anode on your drop weight? So
> long as you keep it active, shouldn't that prevent your corrosion
> problem?
> Ron