[Date Prev][Date Next] [Chronological] [Thread] [Top]

[PSUBS-MAILIST] Need gasket advice

To: <personal_submersibles@psubs.org>
Subject: [PSUBS-MAILIST] Need gasket advice
From: "Paul Carr" <Paul@idchip.com>
Date: Wed, 5 Dec 2001 15:21:38 -0600

I need some advice about what type of gasket to use.

I'm builing a small aluminum pressure housing made of 6 inch pipe with flat endcaps which bolt onto welded flanges. Should i use flat gaskets or o-rings? How do i determine what gauge and type of o-rings to use and how what size of ring groove to cut?

Your help would be very appreciated.

Follow-Ups:
- Re: [PSUBS-MAILIST] Need gasket advice
  - From: "Dan H." <machine@epix.net>

Prev by Date: RE: [PSUBS-MAILIST] Viewport design
Next by Date: Re: [PSUBS-MAILIST] pressure hull depth calculator
Index(es):
- Chronological
- Thread