Re: [PSUBS-MAILIST] Questions for Phil..

["Captain Nemo" <vulcania@interpac.net>]

Hi Phil,

Thanks.  Alec and I are also trying to find the other specs about what ABS
requires and USCG expects, but it's just for drill, since we aren't trying
to get our hulls certified.  (Well, I'm not and I don't think he is.)

Not urgent, but you don't happen to have Table UW-12 for Division 1 Vessels,
or AF-221 for Division 2 Vessels laying around, do you?

Pat



----- Original Message -----
From: "Phil Nuytten" <72020.572@compuserve.com>
To: <personal_submersibles@psubs.org>
Sent: Saturday, August 11, 2001 6:13 PM
Subject: [PSUBS-MAILIST] Questions for Phil..


> Hi, Pat:
> Re: PVHO weld specs - nope, no specific weld detail . . . other than that
> it be acceptable to the certifying agency - which is a flounder of a
> different thickness, altogether! I was suprised that the previous post
> described stick welding with a jet rod ( 7018 - low hydrogen) as the
flavor
> of choice for a  pressure hull weld . . .but, as yet another post points
> out, if you aren't going to certify it, you can stick it together with
> velcro, if you wish.
> Phil Nuytten
>