Re: [PSUBS-MAILIST] Composites Question

[Ed Greany <crest25@attglobal.net>]

Herve,

We should also mention to Chris that your tooling gel coat is only for
molds and plugs - not for the final product.

Ed

Herve Jaubert wrote:
> 
> Hi Chris,
> For the mold surface I recommend you to use a special gel coat on the
> fiberglass body and called tooling, comes in black or red, and facilitates
> molding / demolding operation. It is expensive though but really good.
> Try AOC in FL, tel: 863 815 5000,
> they will give you advises as well for making fiberglass products
> Herve
> ----- Original Message -----
> From: Chris Crouch <eccrouch@cpol.net>
> To: <personal_submersibles@psubs.org>
> Sent: Saturday, November 11, 2000 12:57 AM
> Subject: [PSUBS-MAILIST] Composites Question
> 
> > Hi all, I have been lurking in the shadows for a while and am starting an
> > unrelated project but I was hoping someone here might be able to help.
> > Does anyone know of some good practical literature on constructing a
> > composite mold?
> > In particular resins to be used for the mold surface for a hand layup with
> a
> > room temperature cure?
> >
> > Thanks in advanced
> >
> > Chris Crouch
> >
> >