Re: [PSUBS-MAILIST] Composites Question

["Herve Jaubert" <caribsub@coqui.net>]

Hi Chris,
For the mold surface I recommend you to use a special gel coat on the
fiberglass body and called tooling, comes in black or red, and facilitates
molding / demolding operation. It is expensive though but really good.
Try AOC in FL, tel: 863 815 5000,
they will give you advises as well for making fiberglass products
Herve
----- Original Message -----
From: Chris Crouch <eccrouch@cpol.net>
To: <personal_submersibles@psubs.org>
Sent: Saturday, November 11, 2000 12:57 AM
Subject: [PSUBS-MAILIST] Composites Question


> Hi all, I have been lurking in the shadows for a while and am starting an
> unrelated project but I was hoping someone here might be able to help.
> Does anyone know of some good practical literature on constructing a
> composite mold?
> In particular resins to be used for the mold surface for a hand layup with
a
> room temperature cure?
>
> Thanks in advanced
>
> Chris Crouch
>
>