Re: [PSUBS-MAILIST] Re: Your Message Sent on Mon, 25 Sep 2000 08:51:05 -0600

["Dale" <heinzind@cadvision.com>]

-----Original Message-----
From: Alan D. Secor <secor@btv.ibm.com>
To: personal_submersibles@psubs.org <personal_submersibles@psubs.org>
Date: Monday, September 25, 2000 12:40 PM
Subject: Re: [PSUBS-MAILIST] Re: Your Message Sent on Mon, 25 Sep 2000
08:51:05 -0600


>Dale,
>
>How did you seal the wires coming out of the motor for the pressure
>compensation?
>
>Al
>


I used a modified idea that George gave in the plans..Basically it is a
screw on cap on the end of the shaft, squeezing a 1/8" thick delrin washer,
a 1/4 inch thick rubber washer, and another 1/8 thick delrin washer.  All of
these washers have small holes for the wires, etc to go through them, and
when they are squished, it seals very well..

I think I have some pictures of them, Ill see if I do, and send them in. It
might help explain it better

dale..