[Date Prev][Date Next] [Chronological] [Thread] [Top]

[PSUBS-MAILIST] motor seals

To: "Psubs" <personal_submersibles@psubs.org>
Subject: [PSUBS-MAILIST] motor seals
From: "Dale" <heinzind@cadvision.com>
Date: Tue, 15 Aug 2000 07:15:09 -0600

I am going to use moto glide motors for my K250. I am trying as we discuss this, to pressure compensate them.. the lip seals that are on the motors will not be much good above 30 psi or so..(which is not bad for a lip seal..) the pressure compensation will deal with about a 15psi differental.. so if you come up a bit, you are not waisting too much air..

Steve.. you mentioned a seal M-C 511.. can you give me more information on it.. I too have lots of room in the seal area, and would certainly like a better seal..

(Is M-C the brand???)..

thanks dale..

Follow-Ups:
- [PSUBS-MAILIST] motor seals
  - From: "Gary R. Boucher" <protek@shreve.net>
- Re: [PSUBS-MAILIST] motor seals
  - From: "Captain Nemo" <vulcania@interpac.net>

Prev by Date: Re: [PSUBS-MAILIST]Seals (was Pressure compensation)
Next by Date: [PSUBS-MAILIST] motor seals
Index(es):
- Chronological
- Thread