Re: [PSUBS-MAILIST] Re: ballast tank innerds

["Karl & Shirin Fuller" <fullerk@voyager.co.nz>]

Vance
I have found that if you lay cloth over a corner in a diagonal direction, it
will follow the corner better.
I would use epoxy resin as it seems to adhere better and be more impervious
to water and oxygen, than polyester.
Karl.

> Thanks Phil. As to the black, I was saying that the regular dark gray
turned
> black when water got underneath and started the nasty. It happened around
the
> P5 ports after a longish sit in the Houston office and we had to clean the
> coating to metal and redo the resin. The technique didn't like sharp
corners
> too well, did it?
> Vance
>