[PSUBS-MAILIST] Emer Buoy brake and clear resin

[Michael Dell via Personal_Submersibles]

Apart from the heat issue with epoxy it also has a shrinkage factor to
consider that could affect its ability to bond to all of the surfaces in
the light... Has anyone considered Dielectric silicone for this application?

On Sat, 22 Feb 2025, 10:43 am Jon Wallace via Personal_Submersibles, <
personal_submersibles at psubs.org> wrote:

> Just finished testing a second LED light which I filled with epoxy only
> enough to cover the diodes and other electronics. My light meter shows a
> 10% output increase over the fully filled unit, however to my eye the two
> appear almost exactly the same. Both units utilize the reflectors that came
> with them.
>
> Here's the link again to the brand/model I have tested.
>
> https://tigerlights.com/products/50w-compact-led-flood-light-generation-2-tl500f/
>
> Jon
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20250222/2ead0f91/attachment.html>