[PSUBS-MAILIST] connectors

Wed May 1 17:12:30 EDT 2024

I will add to this that in addition to the SubConn / Impulse type wet or underwater pluggable connectors, in industrial / commercial applications I have also frequently made use of Conax connectors - particularly for high pressures.

https://www.conaxtechnologies.com/

Sean

-------- Original Message --------
On May 1, 2024, 14:13, Jon Wallace via Personal_Submersibles wrote:

> Rick, there are a few options. If you want a commercial grade connector Subconn is an option. Tell them you are with PSUBS and they'll give you a 30% discount. Suburban marine is a DIY option that is likely cheaper than even the Subconn discount. Lastly, depending upon the amps you need you could use Tyco connectors from Digikey and make your own. I am using Tyco connectors for both my low voltage instruments and my higher power components.
>
> Jon
>
> On Wednesday, May 1, 2024 at 03:44:33 PM EDT, Rick Patton via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>
> Was wondering where the best place would be to purchase two prong underwater connectors?
> I was getting ready to pot my wire connections for my 6 outside lights and then realized that it would be much better to be able to easily disconnect them when they go bad and not have to re pot them .
>
> Rick
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20240501/7147d1e8/attachment.html>