[PSUBS-MAILIST] HP air whip

[James Frankland via Personal_Submersibles]

HI Jon

https://undersea-centre.com/

This is a UK company, but they are really good.  Give them a call and tell
them what you are trying to do and they will be able to advise.

They made up a pressure reducing manifold for me.  I have 2x scuba whips
with male din connections both ends.  The 2 hoses plug in and via a
regulator, are then plumbed into 6mm 300bar swagelok pipe.  I will do the
same on my new boat, except i probably wont bother with the regulator as i
dont really think its required.  Will probably just go full HP all round.

Kind Regards
James

On Sun, 3 Mar 2024 at 18:35, Jon Wallace via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Where's a good source for HP whip to connect external SCUBA tank to my 1/4
> npt hull penetrator?  Are you guys using chrome SCUBA whips or hydraulic
> hose with SS connections?
>
> Jon
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20240305/a837722d/attachment.html>