[PSUBS-MAILIST] Weld seam location

[Alec Smyth via Personal_Submersibles]

It goes on top, assuming you have a CT on top, because that minimizes the
length of the welded seam.

Best,
Alec

On Wed, Mar 1, 2023 at 12:20 PM James Frankland via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Hi All
>
> Im not sure if this matters much, but my fabricator has asked whether to
> put the main seam for the weld on either the top, or bottom of the main
> tube.
>
> Obviously this is for when they orientate it for the tower nozzle.
>
> On Jodie B i put it at the top.
>
> Skadoc's is at the bottom.
>
> What do people think?
>
> Thanks
> James
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20230301/638be2f6/attachment-0001.html>