[PSUBS-MAILIST] Thruster

[Alan James via Personal_Submersibles]

Looks good Rick.You could always put a skin of glue over the bolts & surrounding area (on the outside) if you are not sure it will seal. Alan

Sent from Yahoo Mail on Android 
 
  On Sun, 5 Feb 2023 at 2:32 pm, Rick Patton via Personal_Submersibles<personal_submersibles at psubs.org> wrote:   I threaded a 1/4” piece of SS flat bar using a #8X32 tap and used it to pull the 2 wires against the inner surface of the housing to keep it from rubbing against the armature. Sealed the threads with thick pipe dope. 
Hopefully always an external air pressure so if air does make it past the threads, it will just be a very small stream of bubbles. Will post the results when tested. 






Sent from my iPhone_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20230205/3ce0b29e/attachment.html>