[PSUBS-MAILIST] minn-Kota

Sun Aug 14 21:52:33 EDT 2022

 Rick, if the new way you have designed to connect the motor leads to the spade connection on the MK 101 lower unit works, please work up a sketch or drawing and share with Psubs.org.  I know a lot of us would like to see an alternative way of making this connection.  Yo can send drawing to Jon and he can post at web site.
Best
Cliff
    On Sunday, August 14, 2022 at 07:23:46 PM CDT, Rick Patton via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  

 Thanks Alan, the more options the better.
Rick
On Sun, Aug 14, 2022 at 11:18 AM Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

Hi Rick,I got the picture of the worn wire, thanks.It is probably a bit difficult to send photos that would describe exactly what is going on.Am wondering if you could scuff up the housing a bit & epoxy the wire to the housing. After all the magnets are glued to the housing. You might have to clamp the Wire against the housing with a piece of wood or something while drying and use as much epoxy as you can. I have found that epoxy doesn't do a great job of glueing to PVC wire jackets, so try & cover as much of it as you can & cover as much housing as you can with the epoxy.I made my own brushless thruster because I wasn't happy with what was out there; and what was ok cost thousands.Alan

Sent from Yahoo Mail on Android 

  On Sun, 14 Aug 2022 at 6:12 am, Rick Patton via Personal_Submersibles<personal_submersibles at psubs.org> wrote:   Been doing alot of thinking on this as it is a big problem. I might see if I can fabricate two things that are rigid that do a hard 90 off the spade on the motor which will then do another hard 90 again just before the wall of the housing, then shorten the wires coming out of the epoxy and put spade connectors on them again so that you are plugging them in just as they come out of the rod going thru the hull that is filled with epoxy instead of plugging them in at the motor like the factory did.  As they say,,,Looks good on paper. Just finished giving the inside another coat of paint working my way out the back. What a real pain as I had to do a lot of masking with painters tape on the wires and piping to keep them from getting paint on them and using a real small brush sometimes to get into the tight spots. Now I have to remove it all😬, but the next step is welding the back dome on which will be another milestone for me. Gonna try and tig weld the root and hot pass and cap on the inside and not have to do any stick welding to preserve the new paint job that I just did. I'll provide a picture to the group of what I come up with for the motor and results.
Rick
Rick
On Sat, Aug 13, 2022 at 12:36 AM Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

Hi Rick,anything that might help with finding a solution, or showing what the problem is. Alan

Sent from Yahoo Mail on Android 

  On Thu, 11 Aug 2022 at 9:02 am, Rick Patton via Personal_Submersibles<personal_submersibles at psubs.org> wrote:   Alan, do you want a photo of a close up of the bare spot on the wire or a shot of the body and end close together just before you plug in the lugs?
Rick
On Wed, Aug 10, 2022 at 10:21 AM Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

Rick,can you post a photo of it either here or on the Facebook page.AlanSent from Yahoo Mail on Android 

  On Wed, 10 Aug 2022 at 12:51 pm, Rick Patton via Personal_Submersibles<personal_submersibles at psubs.org> wrote:   Thanks Alan, I have some and was thinking that that would be my only option but wanted to double check with the gang. No matter what I put on that area, if it rubs again it's going to go pretty much anything I put on it. I am using the 90 degree spade clips like the factory did but just wish the guys who designed it would of designed it a little differently. Hindsight!
Rick
On Tue, Aug 9, 2022 at 1:51 PM Alan James via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

Rick, There are various versions of liquid tape you could brush on to any exposed wires. Apply a number of thinner coats rather than one thick coat.Alan

Sent from Yahoo Mail on Android 

  On Wed, 10 Aug 2022 at 7:56 am, Rick Patton via Personal_Submersibles<personal_submersibles at psubs.org> wrote:   _______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20220815/d079ce26/attachment.html>