[PSUBS-MAILIST] minn-Kota

[Jon Wallace via Personal_Submersibles]

 Hi Rick, it's definitely tight in there but I don't know of any work around for it.
Jon

    On Monday, August 8, 2022 at 09:04:40 PM EDT, Rick Patton via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 I just put my two Minn-Kota's together and ran them briefly to make sure that they were wired properly and the potiencometer was working and then had to take one apart and noticed that one of the wires had the jacket worn off exposing the stranded wire inside of it. I had always been concerned about the armature rubbing on them as there is almost zero clearance from the lugs that they plug onto until they go inside the shaft that is sealed with epoxy. Has anyone experienced the same thing on that particular motor and if so, what was the fix?
Rick_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20220809/34054c84/attachment.html>