[PSUBS-MAILIST] Dome test chamber

[hank pronk via Personal_Submersibles]

 Thanks guys, it makes me think this should be a design consideration when building a sub, especially a sub with flat ports.  All you would do is increase the size of bolts on the retaining ring, or if that is not practical then increase the number of bolts.  You could do an annual pressure test of each port without removing the port and test on its actual seat.  Hank
    On Monday, October 12, 2020, 1:37:16 AM MDT, James Frankland via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Great idea hank.  

On Sunday, 11 October 2020, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:


Nice !

Brian


--- personal_submersibles at psubs. org wrote:

From: hank pronk via Personal_Submersibles <personal_submersibles at psubs. org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs. org>
Subject: [PSUBS-MAILIST] Dome test chamber
Date: Sun, 11 Oct 2020 08:59:57 -0600







Sent from my iPhone

______________________________ _________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs. org
http://www.psubs.org/mailman/ listinfo.cgi/personal_ submersibles


______________________________ _________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs. org
http://www.psubs.org/mailman/ listinfo.cgi/personal_ submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20201012/a4208485/attachment-0001.html>