[PSUBS-MAILIST] Bladder MBT's

[Sean T. Stevenson via Personal_Submersibles]

Hank, I presume that keeping minimum profile is a design criterion? My first thought was lightweight but rigid tubes that the bladder can expand into, but of course that doesn't save any space. What is the shape and dimensions of the inflated bladder?

Sean

-------- Original Message --------
On May 8, 2020, 05:51, hank pronk via Personal_Submersibles wrote:

> Hi All, I have ordered a 50 gallon water bladder to experiment with for MBT's on my little sub project.  The bladders are pretty tough because they are rated for 65 psi.  I have to figure out how to secure them to the sub.  I am thinking a fold away panel, or spring loaded straps.  They have a 1.25 inch fitting on the top and on the end when laying flat.  I need some ideas?  I will have two side bags and one behind the sphere.
> Hank
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20200508/e5defa46/attachment.html>