[PSUBS-MAILIST] cheap sand blasting

[hank pronk via Personal_Submersibles]

 David, I did do about 1\3 of my little sub and it took it to grey metal.  Now that was a painted surface not rusty.  I will blast a rusty railroad track plate to see if it takes it to grey metal.  I am sure it will.  My new pressure washer will be here mid week I hope.   I could even mail you the attachment and you could rent a washer if you don't have one.Hank
    On Sunday, May 3, 2020, 8:38:48 AM MDT, David Colombo via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Hank, send video once you get it opperational. I got a quote well over  $800 locally to blast the hull prior to final weld up.David
On Sun, May 3, 2020, 6:54 AM hank pronk via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

HI all, I just bought a wet sand blasting attachment for my pressure washer and it cost 129 dollars.  It works fantastic with my 2,500 psi gas pressure washer.  Of coarse my pressure washer died so I ordered a new one with 3,100 psi.  This is a nice cheap way to sand blast.Hank_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20200503/dc76a340/attachment-0001.html>