[PSUBS-MAILIST] (no subject)

[Alan via Personal_Submersibles]

Brian,
it used to frustrate me that there were so many AC LED lights out there
& so few DC. There are heaps of dim-able AC lights but I had to get a Chinese
company to make me up a 36V driver with dimming.
Dimming is an asset when you get a lot of back scatter in low visibility.
I have wondered whether you could hack an AC light because they probably
use a rectifier for DC on the LED.
Alan  

> On 8/03/2020, at 12:59 PM, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> There are a lot of 110AC led's out there , it would be a simple matter to run a DC inverter to make 110ac voltage ,  I wonder if there would be any advantage to that,  there might be some better quality led's that are made for AC voltage, Any thoughts on that?
> 
> Brian
> 
> 
> 
> --- personal_submersibles at psubs.org wrote:
> 
> From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
> Subject: [PSUBS-MAILIST] (no subject)
> Date: Sat, 7 Mar 2020 16:30:26 +0000 (UTC)
> 
>                             15:13 Now playing Watch later Watch later Add to queue Add to queue                
> 
> 	
> How To Make An Underwater Submarine LED Light Bar
> In this video I am converting an everyday LED light bar into the deep diving, oil filled, underwater light bar t...
> 
> 
> 
> _______________________________________________ Personal_Submersibles mailing list Personal_Submersibles at psubs.org http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20200308/da686672/attachment.html>