[PSUBS-MAILIST] cable fittings

[Rick Patton via Personal_Submersibles]

If I put a 150 PSI strain relief fitting on both sides of my threw hull
fitting, will that give me 300 PSI of holding power or still 150, i am
having a brain fart.
Rick

On Mon, Jun 8, 2020 at 11:32 AM Rick Patton <satwelder at gmail.com> wrote:

> Thanks Hank, I have reached out to a couple of vendors that some of you
> had mentioned and am waiting back from one that says they can handle the
> higher than 15 bar standard rating.
> Has the Ice thawed in the lakes up there yet so you can start
> wearing shorts and a T shirt?
> Rick
>
> On Mon, Jun 8, 2020 at 11:12 AM hank pronk via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>> Rick, I just realized that the original lights on Gamma had a brass
>> compression fitting for the power wire.  So it can be done and was a 1,000
>> foot sub.
>> Hank
>>
>> On Monday, June 8, 2020, 3:02:30 PM MDT, Rick Patton via
>> Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>>
>>
>> I don't have a facebook account though my wife does so I guess I would
>> need to use her account to access the Psub page? Good luck on your
>> progress.
>> Rick
>>
>> On Mon, Jun 8, 2020 at 10:27 AM Steve McQueen via Personal_Submersibles <
>> personal_submersibles at psubs.org> wrote:
>>
>> Rick, my project is going well. but slow. I am in the "systems testing"
>> phase with a few build items left. I have been posting mostly on the
>> Facebook Psub page because I found posting pictures was a lot easier.
>> However, I left Facebook the other day so I am back to this platform.
>>
>> Steve
>>
>> On Mon, Jun 8, 2020 at 4:02 PM Rick Patton via Personal_Submersibles <
>> personal_submersibles at psubs.org> wrote:
>>
>> Sorry guys for re asking about the fastener but I knew there were a lot
>> more of you out there that hadn't chimed in yet with good input! Though I
>> won't see more than around 170 psi, I need the extra rating for the 600'
>> test dip.
>> Rick
>>
>> On Mon, Jun 8, 2020 at 9:13 AM Sean T. Stevenson via
>> Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>>
>> I use Conax fittings routinely in industrial applications to many tens of
>> thousands of psi in some cases, and they perform as advertised.
>>
>> Make sure you're sitting down when you read the price quote though.
>>
>> Sean
>>
>>
>> -------- Original Message --------
>> On Jun. 8, 2020, 10:22, Steve McQueen via Personal_Submersibles <
>> personal_submersibles at psubs.org> wrote:
>>
>>
>> Sorry, Conax not Cona. Try this link:  https://www.conaxtechnologies.com/
>>
>> On Mon, Jun 8, 2020 at 12:21 PM Steve McQueen <psub101 at indy.rr.com>
>> wrote:
>>
>> Hi Rick, Besides Blue Globe I am using a product from a company
>> called Cona. www.conax.com. I am using part number PG5-500-A-N. It is
>> untested but hopefully will work. It works on paper anyway : )
>>
>> Steve
>>
>> On Mon, Jun 8, 2020 at 12:09 PM Rick Patton via Personal_Submersibles <
>> personal_submersibles at psubs.org> wrote:
>>
>> I posted the other day about cable threw hull water tight fittings and
>> only got one response back and was hoping for more feed back as I know most
>> of you probably don't make your own so for the ones that buy them, is Blue
>> Globe the only player out there besides sealcon?
>> Thanks
>> Rick
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20200608/6d0f553f/attachment-0001.html>