[PSUBS-MAILIST] Pressure Transducer

[Jon Wallace via Personal_Submersibles]

 Thanks Emile.  I'll check them out.
Jon

    On Wednesday, July 22, 2020, 09:50:24 AM EDT, via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 
Hi Jon, 

  

I just bought one ( 400 meter @ 0,1 meter reading) from RScomponents. I am no specialist but they have a lot of choise.

  

Br,Emile

  

Van: Personal_Submersibles <personal_submersibles-bounces at psubs.org> Namens Jon Wallace via Personal_Submersibles
Verzonden: woensdag 22 juli 2020 15:11
Aan: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Onderwerp: [PSUBS-MAILIST] Pressure Transducer

  

Sean,

  

I think you've talked about sourcing pressure transducers in the past, do you have any recommendations for ones that you have found reliable?  I'm getting quite frustrated trying to interface the SSI Technologies P51 series with a 16-bit ADC (using 15 bits) and unable to get results that are anywhere close to my calculated/expected results even considering worst case accuracy limits.  I don't mind paying more for a sensor that is going to perform close to it's datasheet specs.  Specifically, looking for 500 psia with .5% or better accuracy.  I'd prefer .25% or better accuracy but can live with .5%.

  

Jon
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20200722/f56f528a/attachment-0001.html>