[PSUBS-MAILIST] Acrylic Dome

[Alan via Personal_Submersibles]

Tim,
some of those young girls know their stuff but communication looks like
It may be difficult in this case.
With regard to an acrylic dome, you would have to be pretty specific &
see material certification & question them about the process first. Then
check the dome with a spectrometer for any stress after forming & then
pressure test it.
It would almost pay to visit first.
I had 11 motors built in to my specs, with a 316 shaft etc  & the manufacturer did
a really good job.
Alan




> On 18/01/2020, at 10:38 AM, T Novak via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
>  
> Whoever made her t-shirt  can't spell.  But she is just the "teenaged girl across the counter", not the seasoned technician. You don't know the quality until it's on your bench.
> Tim
>  
> From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of Alan James via Personal_Submersibles
> Sent: Friday, January 17, 2020 12:40 PM
> To: psubs.org <personal_submersibles at psubs.org>
> Subject: [PSUBS-MAILIST] Acrylic Dome
>  
> Looked on Alibaba to see what China offered in the way of cast acrylic domes. 
> Was contacted as they track your search history. 
> Have doubts about the firm already as below is a picture of my contact! 
> Alan
>  
> 
> <image001.jpg>
> 
> Sent from Yahoo Mail on Android
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20200118/08516683/attachment.html>