[PSUBS-MAILIST] Scuba Tank Purchase Questions

[hank pronk via Personal_Submersibles]

Steve. Gamma had the same issue 
We blew an o ring just prior to loading a passenger and David jumped on the sub to save the air

Sent from my iPhone

> On Feb 20, 2020, at 9:56 AM, Steve McQueen via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> 
> Cliff, thanks. Good to hear about actual field issues. I will reconsider my thoughts accordingly.  I have completed my contribution for Pisces VI and have refocused on finishing my project. Having your own compressor is a nice advantage. Are your MBT HP tanks aluminum or steel?
> 
>  My K-250 is named "The Great Escape" (get it?).
> 
> Steve
> 
> 
> 
> 
> 
> 
>> On Thu, Feb 20, 2020 at 11:36 AM Cliff Redus via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>> Steve, if it were me, I would go with DIN fitting on scuba tanks.  About 2 years after I built my boat I had an O-ring blow while I was on the boat ramp ready to launch. If this would have happened during a dive, I would not have been unable to blow my MBTs by myself.  I would have had to have divers to manually inflate my MBT with open vent ports.  My experience is that most scuba shops can fill scuba tanks with DIN connections.  After the incident, I switched my MBT HP air supply to DIN values and have never had any trouble since then.  Also, last year I purchased a portable scuba compressor that came with an adapter to let you fill Yoke or DIN valves.  Also this compressor is capable of filling a steel HP tank if I want to.  To me, the real benefit of steel tanks with DIN connections is the ability to fill to a higher pressure.  If you don't need the higher pressure, then aluminum are lower cost.
>> 
>> We are all looking forward to your sea trials for your lime green K250.  I love the paint job on your boat.  Has she got a name yet?  I am surprised you have had any time to work on your boat with the PLC work you been doing for Scott on his Pieces 6.
>> 
>> Looking forward to catching up with you this year at one of the psub events.
>> 
>> Best
>> 
>> 
>> 
>> On Thursday, February 20, 2020, 09:54:59 AM CST, Steve McQueen via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>> 
>> 
>> All, getting ready to buy 2 scuba tanks for my K250. Just wanted to see if anyone had an opinion of my thoughts?
>> 
>> 1) Choosing steel vs. aluminum (prefer its weight/buoyancy characteristics)
>> 2) While I was wanting as much air volume as possible I decided against a HP version as I have heard most places won't (can't?) fill to that capacity anyway
>> 3) Deciding on standard pressure steel 80s with K-valve (yoke fitting)
>> 
>> I've been watching for a while (including Black Friday) but it seems there isn't much mark up and these tanks don't appear to go on sale.
>> 
>> Thanks,
>> Steve
>> 
>> 
>> 
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20200220/1c6cafd8/attachment.html>