[PSUBS-MAILIST] MBT vent tube

[Alec Smyth via Personal_Submersibles]

Outstanding!

On Fri, Apr 17, 2020 at 8:50 PM Rick Patton via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Well I fabricated a jig on my fab table using 3/16” X 1 1/2” flat bar,
> packed the 1” SS tube with sand, welded ends on it, said a few prayers and
> went for it. I first tried cold bending it but needed a much stronger jig
> for that so I pulled out my rose bud and hot bent it and it worked great!
> Now I have a lot of buffing to do to make it look pretty again.
> Rick
>
>
>
>
>
>
>
>
>
>
>
>
> Sent from my iPhone_______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20200418/e925dd81/attachment.html>