[PSUBS-MAILIST] buoyancy

[Alec Smyth via Personal_Submersibles]

Hi Rick,

I've attempted the sand technique with no luck. I do have a couple of
simple bending machines, but if its something difficult there's an outfit
in Maryland that does nothing but bending. I've used their services many
times, and can't recommend them more highly.

https://www.josephkavanaghco.com/


Best,
Alec

On Tue, Apr 14, 2020 at 10:52 PM Rick Patton via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> A reach out to the K-350 gang. Do any of you happen to know the total
> payload weight (two people)  the boat is designed for with the MBT's and
> VBT flooded?
> Also, has anyone hot bent SS tubing with sand im it in a tight radius
> before with good results?
> I am going for a 25"/26" diameter.
> Thanks
> Hope all are doing OK with this friggin virus going around.
> Rick
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20200414/12615343/attachment.html>