[PSUBS-MAILIST] new dome for E3000

[hank pronk via Personal_Submersibles]

Brian yes it was a thick slab
Hank

Sent from my iPhone

> On Oct 20, 2019, at 1:24 PM, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Hank,      Did that start as one thick square piece ? 
> 
> Brian
> 
> 
> --- personal_submersibles at psubs.org wrote:
> 
> From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
> To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
> Subject: [PSUBS-MAILIST] new dome for E3000
> Date: Sun, 20 Oct 2019 17:20:51 +0000 (UTC)
> 
> Mission accomplished, my dome is out of the lathe and ready for machine polishing.  Many thanks to River for helping with drawings and design.  
> After polishing it will go into the oven for annealing.  I am making some small modifications to the oven based on conversations with experts in the field.
> Hank
> _______________________________________________ Personal_Submersibles mailing list Personal_Submersibles at psubs.org http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20191020/58a05053/attachment.html>