[PSUBS-MAILIST] new dome progress

[hank pronk via Personal_Submersibles]

 Brian,Yes I made a giant ball turning tool.  I had to make three of them to get it to work.  I weighs about 100 lbs and could be heavier.  I have an electric actuator on it to feed it.  I also have a speed control on it.Hank
    On Monday, October 14, 2019, 3:34:42 PM MDT, Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Hank,     Did you make a special tool for that?
Brian


--- personal_submersibles at psubs.org wrote:

From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Subject: [PSUBS-MAILIST] new dome progress
Date: Mon, 14 Oct 2019 20:05:52 +0000 (UTC)

Hi All,I spent the entire 3 day weekend machining the inside radius of my new dome.  My radius turning attachment I built is working just fine, and is built to machine the inside and outside radius.Hank_______________________________________________Personal_Submersibles mailing listPersonal_Submersibles at psubs.orghttp://www.psubs.org/mailman/listinfo.cgi/personal_submersibles_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20191014/ddc7da82/attachment.html>