[PSUBS-MAILIST] Purge Valve

[Alan via Personal_Submersibles]

Thanks David,
Still thinking through some of this stuff lol.
Trying to make the systems bullet proof.
Alan

> On 29/03/2019, at 5:53 PM, David Colombo via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Hi Alan, the yoke that is attached to my hp air tank has a bleeder valve as part of the yoke, then a shut off valve prior to entering the pressure hull. Procedure for tank change out, shut valve, open bleed valve, then remove yoke.  I dont have the same type of setup for my o2 tanks though as there is no hidden pressure zone.
> David
> 
>> On Thu, Mar 28, 2019, 9:06 PM Alan via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>> Hi,
>> Just wondering if people use / have an external valve to purge air / O2 from the 
>> system to enable the removal of the first stage yoke from the tank.
>> With a dive set up you just press the second stage purge valve.
>> Alan
>> 
>> 
>> 
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190329/1f2ea57e/attachment-0001.html>