[PSUBS-MAILIST] Silicone

[Rick Patton via Personal_Submersibles]

Now that it sounds like I know what to use, but will still call them and
confirm it, since the stuff is I am sure expensive, can anyone recommend
about how many gallons I would need to do a K-350?
Rick

On Wed, Mar 27, 2019 at 3:45 PM Jon Wallace via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> I couldn't say that was impossible since the document that we have from
> Rick Gallenberger goes back to 2011.  I wish I could remember more from his
> presentation, which was excellent by the way.  But my memory seems to
> suggest that he was not a believer in primers.  According to the SW product
> page, "This product can be applied directly to marginally prepared steel
> surfaces."
>
>
> https://protective.sherwin-williams.com/detail.jsp?A=sku-26179%3aproduct-6843
>
>
>
>
> ------------------------------
> *From:* David Colombo via Personal_Submersibles <
> personal_submersibles at psubs.org>
> *To:* Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> *Sent:* Wednesday, March 27, 2019 9:10 PM
> *Subject:* Re: [PSUBS-MAILIST] Silicone
>
> Hi Jon,
> I have a call into the West Coast rep to ask the question, Is the
> Macropoxy required to have the SeaGuard 6000 Marine epoxy as a primer?
> According to their most recent bulletin from Feb 23, 2016, The SeaGuard
> 6000  it appears that the the Macropoxy 646 goes over the SeaQuard 6000,
> and is recommended for steel, atmospheric service.  I'll let you know what
> I find out.
>
> Best Regards,
> David Colombo
>
> 804 College Ave
> Santa Rosa, CA. 95404
> (707) 536-1424
> www.SeaQuestor.com <http://www.seaquestor.com/>
>
>
>
> On Wed, Mar 27, 2019 at 5:43 PM Jon Wallace via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>
> Macropoxy 646 Fast Cure Epoxy is what the Rep recommended.
>
>
> ------------------------------
> *From:* Rick Patton via Personal_Submersibles <
> personal_submersibles at psubs.org>
> *To:* Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> *Sent:* Wednesday, March 27, 2019 7:37 PM
> *Subject:* Re: [PSUBS-MAILIST] Silicone
>
> Alec
>
> Would I just ask for macropoxy and what color or are there different types?
> Rick
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190327/5b903473/attachment.html>