[PSUBS-MAILIST] epoxy

[Sean T. Stevenson via Personal_Submersibles]

Sorry, there was a typo in that link.

Try this:

https://www.mgchemicals.com/products/potting-compounds/epoxy-potting-compounds/

Sean

-------- Original Message --------
On Mar 12, 2019, 12:38, Sean T. Stevenson via Personal_Submersibles wrote:

> https://www.mgchemicals.com/products/potting-compounds/epoxy-pottting-compounds/
>
> Sean
>
> -------- Original Message --------
> On Mar 12, 2019, 12:29, Rick Patton via Personal_Submersibles wrote:
>
>> Can anyone recommend a good dielectric non shrinking epoxy?
>> I attached my battery pods to the hull using 3 pieces of 4" schedule 80 pipe that are about 4" long. only the aft pipe goes threw the wall of the pod and hull and I am using short pieces of 1/2" copper all thread that will protrude about 2" inside the hull and pod that I will put lugs on that will transfer the battery power inside the hull and I will fill the void between pod and hull with an epoxy to seal the two spaces in case of flooding or possible hydrogen explosion.
>> Rick
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190312/8a5c2e55/attachment.html>