[PSUBS-MAILIST] Hull Painting - more info

[Alec Smyth via Personal_Submersibles]

Brian,

That's a keeper email! Remember you get a really substantial PSUBS discount
from Sherwin Williams.

Best,
Alec





On Tue, Jun 25, 2019 at 5:54 PM Brian Hughes via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> From my local contact:
>
> "Hi Brian,
>
> Surface preparation per technical data sheet:
>
> Because this is an immersion service substrate, the surface should be
> removed of all existing coatings to ensure proper adhesion and durability.
>
> SSPC-SP10 / NACE 2 Near-White Blast Cleaning (see attached).
>
> When viewed without magnification shall be free of all visible oil,
> grease, dust, dirt, mill scale, rust, coating, oxides, corrosion products
> and other foreign matter of at least 95% of each unit area. Unit area shall
> be approximately 3 in. x 3 in. (9 sq. in.).
>
> Blast profile should be 1.5-2 mil.
>
> Macropoxy 646 Fast Cure Mill White is the recommended primer (See
> attached).
>
> The mix ratio is 1:1; a two gallon kit should cover 380 sq ft @ 6 mils dry
> film thickness (recommended for sufficient corrosion protection). The
> product has a sweat-in time of 30 minutes (wait time after mixing part a
> and part b together) with a pot life of 4 hours. It can be rolled or
> brushed, but spray application is favorable (see recommended application
> info on pump, pressure, hose and tip size, and reduction). Please apply
> under favorable temperature and humidity conditions.
>
> Do not mix catalyzed material with new.
>
> Sherloxane 800 Safety Yellow Topcoat (see attached):
>
> The mix ration is 4:1; a one gallon kit should cover 240 sq ft/gal @ 6
> mils DFT. There is no sweat in time and the pot life is 4 hours. It can be
> rolled or brushed, but spray application is favorable, to achieve
> recommended dry film thickness in one coat. (see recommended application
> info on pump, pressure, hose and tip size). Please apply under favorable
> temperature and humidity conditions. Do not mix catalyzed material with new.
>
> Please consider accessory items you may need for surface prep, mixing,
> reducing, application and cleanup, which SW can facilitate or supply for
> you.
>
> A two gallon kit of Macropoxy 646 Mill White is $120.00.
> A one gallon kit of Sherloxane 800 Safety Yellow is $195.00.
>
> Our Elkridge Commercial store at 6650 Santa Barbara Rd. 21075
> (410-796-3397) has the products in stock. The manager is Steve, with whom I
> have discussed your application. I am copying him on this email.
>
> Please feel free to contact me if you need anything else.
>
> Sincerely,"
>
>
> New Residential Account Executive
>
> Sherwin Williams Capital DC Area
>
> 301-674-3779
>
> judith.d.jensen at sherwin.com
>
>
>
> Get Outlook for Android <https://aka.ms/ghei36>
>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190625/f6891f67/attachment.html>