[PSUBS-MAILIST] SeaQuestor progress

[David Colombo via Personal_Submersibles]

Hi Hank, my plan is to coat the foam with a thin layer of glass with epoxy
to create a hard shell.  At that point i will either fair the surface to
make a plug,  or coat the epoxy with foil and then cast a part. It all
depends on my fiberglass abilities and the build schedule.  My domes won't
be finished now till September at the earliest, so I've got some time to
work thru the process.
David

On Sat, Jun 22, 2019, 4:41 AM hank pronk via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> David,
> Are you making a plug or will you just finish the fibreglass that goes
> over the styrofoam?  What are you putting over the foam to protect it?
> Hank
>
> On Saturday, June 22, 2019, 12:34:14 AM MDT, David Colombo via
> Personal_Submersibles <personal_submersibles at psubs.org> wrote:
>
>
> Hi Guys, working today on the rear exoskeleton of the SeaQuestor, shaping
> the foam and dry fitting the vectored thrusters.  Tomorrow i will be
> glueing the aft four pieces of foam into 1 block, and then final shaping
> prior to starting the first layer of fiberglass.
> David
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190622/3b3c0353/attachment.html>