[PSUBS-MAILIST] Hull Painting

[Jon Wallace via Personal_Submersibles]

 No, my understanding is that you want Macropoxy directly on the hull.  If you want red or yellow, use Sher-loxane over the Macropoxy.  Although, frankly the datasheet states you can use Sher-loxane directly on metal, so......??  Maybe someone else has a better answer.
Jon

    On Tuesday, July 9, 2019, 09:28:52 PM EDT, Rick Patton via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 JonThat was why I responded the way I did for clarification. Are you saying that the Macropoxy and Sher-Lozane have the same propertys and that I would want to use the Sher-Lozane if i wanted a color other than White?Rick
On Tue, Jul 9, 2019 at 3:12 PM Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

 Rick, I'm not sure I'd call it "only" a primer.  SW calls it that, but it's probably going to be my finish coat as well.
    On Tuesday, July 9, 2019, 07:06:48 PM EDT, Rick Patton via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Ok gotcha the Macropoxy is only a primer and the Sher-Loxane 800 is the finish coat?Rick

  _______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190710/eb701c79/attachment.html>