[PSUBS-MAILIST] SeaQuestor progress

[Alan via Personal_Submersibles]

Looks good David.
On the motor mount you have a bracket mounted on top of a white cylinder,
is this for rotation? Also, are the lights from Nuytco, they look similar!
Alan



> On 14/02/2019, at 8:03 PM, David Colombo via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> Hi guys, working on the exoskeleton for the SeaQuestor, dry fitting the rear thrusters with the new machined mount tubes, horizontal wing thrusters,  and forward wing lights. The rear thruster assembly includes a segment with external ports for air compensatation and future sensors. My thru hull penatration plates are at the shop having final machining and shoud be ready in a week. With a total of 30 port locatations I have plenty for future connections. I also get to make a few design esthetic changes as the cnc ribs were cut from my 3d model 1 year ago and it did not reflect recent revisions. But thats half the fun of design. Build a mock up and then make refinements. I hope to have the full set of rib stations adjusted and locked into position on the keel stand this weekend so i can start the foam cutting. 
> Best Regards,
> David
> <Image935852460642039751.jpg>
> <Image6325880967552445361.jpg>
> <Image2524775597811180538.jpg>
> <Image1956599815228377227.jpg>
> <Image1155490186861617641.jpg>
> <Image8474093393079436704.jpg>
> <Image859092703315405636.jpg>
> <Image5046581881221001057.jpg>
> <Image8618917649768473062.jpg>
> <Image6490811729493042951.jpg>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles