[PSUBS-MAILIST] (no subject)

[hank pronk via Personal_Submersibles]

 Hi Sean,I have a weight on the rope maybe 5 lbs to keep it in place.  I have the hand speed on half for the video and yes I am sure it will cut 5\8 double braid in one pass.  The throat of the cutter is only about 5\8 so I would have to chew on a larger line.  I made it so a rope can't get in behind the cutter and I kept it small so it doesn't interfere with the gold bars.  This arm is very powerful.Hank
    On Saturday, February 9, 2019, 11:58:24 AM MST, Sean T. Stevenson via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Hank, how much tension was that polypropylene under in the video? You went through it like butter.

Is this integrated into a clamping jaw? How do you make sure that you don't cut something that you're only trying to grab?

What do you figure the capacity is? Would it go through 5/8 polyester double braid?

Sean


-------- Original Message --------
On Feb 8, 2019, 14:29, hank pronk via Personal_Submersibles < personal_submersibles at psubs.org> wrote:


Sent from ProtonMail mobile



-------- Original Message --------
On Feb 8, 2019, 14:29, hank pronk via Personal_Submersibles < personal_submersibles at psubs.org> wrote:


Sent from ProtonMail mobile



-------- Original Message --------
On Feb 8, 2019, 14:29, hank pronk via Personal_Submersibles < personal_submersibles at psubs.org> wrote:


 Hi All,Just finished the rope cutter on my electric manipulator.  Here is the videohank
   ----- Forwarded Message ----- From: xxx xxxxx <mp13 at live.ca>To: hanker_20032000 at yahoo.ca <hanker_20032000 at yahoo.ca>Sent: Friday, February 8, 2019, 2:27:46 PM MSTSubject: 
 https://www.youtube.com/watch?v=InLh7m2wuVo

  _______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190209/0dd3bd36/attachment.html>