[PSUBS-MAILIST] K 350

[David Colombo via Personal_Submersibles]

Tom, the SeaQuestor used 2640lbs of 516gr70 steel for its hull. 3/8" hull x
9ft and 3/4" sails x 32"od x2. All told prior to welding 14k. Dan is right
thats the cheap part of the build.
David Colombo
On Fri, Apr 26, 2019, 4:29 PM Daniel Lance via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Tom,
> I haven't quoted any 516Gr70 lately but I think if your really resourceful
> you might be able to build a basic K350 for about 30k (+/-) . Keep in mind
> the bare hull is the cheap part   :) .
> Dan Lance
>
> On Fri, Apr 26, 2019, 10:13 AM TOM WHENT via Personal_Submersibles <
> personal_submersibles at psubs.org> wrote:
>
>> I've been lurking on this board for several years now. I've built a
>> couple surface boats and am an avid scuba diver.
>> I'm also a blue collar metal worker,  so I pick my projects carefully.
>>
>> Can anyone comment on the actual materials cost of building a K350 ? I
>> would be doing all of the welding, machining and fabricating myself. After
>> i'm finished my current boat project,  this could be next.
>>
>> Cheers,
>> Tom
>>
>>
>> Get Outlook for Android <https://aka.ms/ghei36>
>>
>> _______________________________________________
>> Personal_Submersibles mailing list
>> Personal_Submersibles at psubs.org
>> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>>
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190426/c346803c/attachment.html>