[PSUBS-MAILIST] PVHO rules

[hank pronk via Personal_Submersibles]

 Jon,thank you for that, I will look through it for clues.Hank
    On Sunday, April 21, 2019, 4:34:16 PM MDT, Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 See the 2007 rules at the link below.  I see no mention of forming rules or temperatures.  Annealing yes, forming no.  I suspect the reference to "maximum forming temperature" you saw was merely meant to mean specs from the manufacturer.
https://archive.org/stream/gov.law.asme.pvho-1.2007/asme.pvho-1.2007_djvu.txt


      From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org> 
 Sent: Sunday, April 21, 2019 1:50 PM
 Subject: Re: [PSUBS-MAILIST] PVHO rules
  
 Jon,I am specifically looking for the forming rules and temperatures.Hank
   
   _______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190421/4c171294/attachment.html>