[PSUBS-MAILIST] PVHO rules

[Jon Wallace via Personal_Submersibles]

PVHO rules come from ASME and they don't give them away for free.  If you look hard enough you can find them online.  I've got a 2010 set someplace on my server, I'll have to dig it out though.  I'll look later this evening if you haven't found them online by that time.

      From: hank pronk via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Sunday, April 21, 2019 10:14 AM
 Subject: [PSUBS-MAILIST] PVHO rules
   
Hi All,I am looking for the actual PVHO rules for Acrylic forming.  I can find all the references to the rules but not the rules.  I am planning to make a 5 inch thick 60 degree Hemispherical segment either from forming  or from machining out of a thick slab.  I prefer to form it because I will need an oven to heat treat it after anyways, but I don't want to form it without the rules.Hank_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190421/3b4f1a28/attachment.html>