[PSUBS-MAILIST] k350 question

[Jon Wallace via Personal_Submersibles]

Brian, the K600 use some kind of caulking sealer on the bow tank and a self sticking rubber strip, sort of like window stripping but not very compressible, on the stern tank.  No clue if it was intentional or not.  Perhaps the rubber strip on the stern end was just temporary.



On Thu, Apr 4, 2019 at 9:36 PM Brian Cox via Personal_Submersibles <personal_submersibles at psubs.org> wrote:

Hi All,   On the K boats ,  how do those front and back ballast hoods seal to against the hull?   - just curious.
Brian

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________Personal_Submersibles mailing listPersonal_Submersibles at psubs.orghttp://www.psubs.org/mailman/listinfo.cgi/personal_submersibles_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190409/036fd323/attachment-0001.html>